Ember Glow Twisted Cable Fingerless Gloves Free Pattern

Wrap Your Hands in Autumn Warmth: The Ember Glow Twisted Cable Fingerless Gloves

There's something magical about the transition from fall to winter—the crisp air, the golden light, and the irresistible urge to wrap yourself in something cozy. The Ember Glow Twisted Cable Fingerless Gloves capture that exact feeling, transforming a simple accessory into a statement piece that evokes a glowing fireplace on a chilly evening.

These gloves feature an intricate twisted cable pattern that runs vertically along the back of the hand, creating a braided, rope-like texture that's both visually stunning and wonderfully tactile. Knit in a gradient of burnt orange to deep amber, they transition smoothly from wrist to fingers, mimicking the warm hues of a sunset. Whether you're a seasoned knitter looking for your next project or a confident beginner ready to tackle cables, this pattern offers a rewarding challenge with spectacular results.

Let's dive into creating these beautiful fingerless gloves that will keep your hands warm while leaving your fingers free for texting, crafting, or simply enjoying a hot cup of cider.

Materials Needed

Before you begin, gather the following supplies:

• Yarn: Worsted weight yarn in gradient colors (e.g., Malabrigo Rios in 'Cobre' or a hand-dyed gradient from orange to brown), approximately 200 yards
• Needles: US 6 (4.0 mm) knitting needles (or size needed to obtain gauge), plus a cable needle
• Notions: Stitch markers, stitch holder or scrap yarn, tapestry needle for weaving in ends

Gauge: 22 stitches and 28 rows = 4 inches in stockinette stitch. Always check your gauge before starting—it ensures your gloves fit perfectly!

Size Information

This pattern is written for adult medium (7.5 inches hand circumference). To adjust the size, add or subtract stitches in multiples of 6. Each multiple of 6 adds or removes approximately 1 inch of circumference.

Step-by-Step Instructions

Abbreviations You'll Need

• CO: Cast on
• K: Knit
• P: Purl
• C4F: Slip 2 stitches to cable needle, hold in front, knit next 2 stitches, then knit 2 from cable needle
• C4B: Slip 2 stitches to cable needle, hold in back, knit next 2 stitches, then knit 2 from cable needle
• M1L: Make one left (increase)
• M1R: Make one right (increase)
• K2tog: Knit two together (decrease)
• SSK: Slip slip knit (decrease)
• St(s): Stitch(es)

Getting Started: The Right Glove

Cast On and Ribbing:
CO 36 stitches. Join in the round, being very careful not to twist your stitches. Place a stitch marker to mark the beginning of the round.

Work K2, P2 ribbing for 2 inches. This creates a snug, stretchy cuff that will keep the gloves securely on your hands.

The Twisted Cable Pattern

Now we'll establish the beautiful cable pattern that gives these gloves their signature look. The pattern repeat is 6 stitches, and you'll work it 6 times around (36 stitches total).

Round 1: *P2, C4F, P2, C4B* — repeat from * to * around (6 repeats).
Note: This round creates the crossing effect. The C4F crosses to the left, and the C4B crosses to the right, creating that braided, twisted look.

Round 2: *P2, K4, P2, K4* — repeat from * to * around.
Round 3: *P2, K4, P2, K4* — repeat from * to * around.
These plain rounds let the cables relax and set before the next crossing.

Round 4: *P2, C4B, P2, C4F* — repeat from * to * around.
Notice how the cable directions are reversed from Round 1—this creates the twisted rope effect.

Rounds 5-6: *P2, K4, P2, K4* — repeat from * to * around.

Repeat these 6 rounds until the piece measures 4 inches from the cast-on edge. You should see a beautiful, intricate braided pattern emerging along the back of the glove.

Thumb Gusset: Shaping for Comfort

Now we'll create the thumb opening. The gusset increases gradually to accommodate your thumb.

Round 1 (Increase Round): Work in pattern across first 18 stitches (this will be the back of your hand), place marker, M1R, K1, M1L, place marker, work pattern across remaining 18 stitches (palm side).

Round 2: Work in pattern, knitting the gusset stitches between the markers (no increases this round).

Round 3 (Increase Round): Work in pattern to first marker, M1R, knit to second marker, M1L, work to end of round.

Repeat Rounds 2-3 until you have 13 stitches between the markers (you'll have increased 6 times total). The gusset should feel comfortable when you place your thumb against it.

Separating the Thumb:
Next round: Work in pattern to first marker, remove marker, place the next 13 stitches onto a stitch holder or scrap yarn (these are your thumb stitches), remove second marker, CO 1 stitch over the gap, work pattern to end of round. You should have 36 stitches total back on your needles.

Continuing the Body

Continue working in the established cable pattern until the piece measures 7 inches from the cast-on edge, or your desired length to the knuckle. Try it on as you go—everyone's hands are different!

Top Ribbing:
Work K2, P2 ribbing for 1 inch. This creates a neat, finished edge at the top of the glove.

Bind off loosely in pattern. Tip: Use a larger needle to bind off or bind off loosely to ensure the edge isn't too tight.

Knitting the Thumb

Place the 13 stitches from your holder onto your needles. Pick up and knit 3 stitches from the gap you created (16 stitches total).

Work in stockinette stitch (knit every round) for 1 inch. Bind off loosely.

Creating the Left Glove

Work the left glove exactly as the right, but mirror the thumb gusset placement: place marker after 18 stitches, then M1L, K1, M1R, place marker. Continue as instructed. This ensures the thumb sits on the correct side for your left hand.

Finishing Touches

Weave in all ends carefully using your tapestry needle. Block gently to shape—this helps the cables relax and look their best. Lay flat to dry.

Tips for Cable Knitting Success

• Use a cable needle you love: Whether it's a traditional U-shaped one or a curved one, find what works for you.
• Keep your tension even: Cables can pull your knitting tighter. Be mindful to keep consistent tension, especially on the rounds after cable crossings.
• Count your stitches regularly: Especially after increase rounds for the thumb gusset.
• Try on as you go: The beauty of fingerless gloves is that you can test the fit easily. Don't be afraid to adjust length.

Final Thoughts

These Ember Glow Twisted Cable Fingerless Gloves are more than just an accessory—they're a cozy companion for autumn walks, chilly mornings, and everything in between. The gradient yarn creates a stunning visual effect that transitions from burnt orange at the wrist to deep amber at the fingers, like holding a piece of sunset in your hands.

Whether you're making them for yourself or as a heartfelt handmade gift, these gloves are sure to become a favorite. The intricate cables are surprisingly manageable once you get into the rhythm, and the result is absolutely worth the effort.

Happy knitting, and may your hands be wrapped in warmth and beauty all season long!