Emberfall Ridge Fingerless Gloves Free Pattern – Knit Cozy Cable Textures

Wrap your hands in the warmth of a crackling autumn fire with these richly textured fingerless gloves. The intricate cable and ribbing design adds a touch of rustic elegance to any cozy outfit. Whether you're sipping hot cider on a crisp morning or curling up with a good book, these gloves keep your fingers free while your hands stay toasty. The burnt orange tones evoke falling leaves and golden sunsets, making this the perfect seasonal knitting project.

This pattern is designed with beginners in mind—if you've mastered knit, purl, and basic cables, you're ready to tackle this rewarding project. The gloves are worked flat and seamed, giving you a beautiful cable detail on the back of the hand that's both functional and stunning. Let's dive in!

Materials Needed

Before you begin, gather these supplies:

• Yarn: Worsted weight yarn in a warm burnt orange or deep rust tone (approx. 150-200 yards). Look for a yarn with good stitch definition to make those cables pop!
• Needles: US 7 (4.5 mm) knitting needles (or size needed to obtain gauge), plus a cable needle
• Gauge: 20 stitches and 26 rows = 4 inches in stockinette stitch
• Extras: Stitch holder, tapestry needle for weaving in ends, scissors

Pro tip: If you're between sizes, swatch first! Getting the right gauge ensures your gloves fit comfortably. The pattern is written for a medium adult hand, but you can adjust needle size to achieve the perfect fit.

Step-by-Step Instructions

This pattern is worked flat and seamed, creating a beautiful cable detail on the back of the hand. Make two identical gloves—one for each hand!

Abbreviations

• CO: cast on
• K: knit
• P: purl
• K2tog: knit two together
• SSK: slip, slip, knit (decrease)
• C4F: slip 2 stitches to cable needle, hold in front, knit 2, knit 2 from cable needle
• C4B: slip 2 stitches to cable needle, hold in back, knit 2, knit 2 from cable needle
• St(s): stitch(es)
• RS: right side
• WS: wrong side
• M1L: make one left (increase)
• M1R: make one right (increase)

Pattern (Make 2)

Cuff

CO 36 sts.

Row 1 (RS): *K2, P2* repeat from * to end.

Row 2 (WS): *K2, P2* repeat from * to end.

Repeat these 2 rows until cuff measures 3 inches from cast-on edge, ending with a WS row. This ribbed cuff creates a snug, comfortable fit that keeps warmth in and cold out.

Hand Section

Now we'll establish the cable pattern. Don't worry—it's simpler than it looks! The cables are framed by ribbing, with a stockinette panel in the center for the palm.

Row 1 (RS): K4, P2, C4F, P2, K12, P2, C4B, P2, K4 (36 sts)

Row 2 (WS): P4, K2, P4, K2, P12, K2, P4, K2, P4

Row 3 (RS): K4, P2, K4, P2, K12, P2, K4, P2, K4

Row 4 (WS): P4, K2, P4, K2, P12, K2, P4, K2, P4

Row 5 (RS): K4, P2, C4F, P2, K12, P2, C4B, P2, K4

Row 6 (WS): P4, K2, P4, K2, P12, K2, P4, K2, P4

Row 7 (RS): K4, P2, K4, P2, K12, P2, K4, P2, K4

Row 8 (WS): P4, K2, P4, K2, P12, K2, P4, K2, P4

Repeat Rows 1-8 until hand section measures 3 inches from cuff, ending with a WS row. You'll see the beautiful cable pattern emerging on the back of the hand!

Thumb Gusset

Now we'll shape the thumb opening. The increases create a wedge shape that accommodates your thumb comfortably.

Row 1 (RS): K4, P2, C4F, P2, K1, M1L, K10, M1R, K1, P2, C4B, P2, K4 (38 sts)

Row 2 (WS): P4, K2, P4, K2, P14, K2, P4, K2, P4

Row 3 (RS): K4, P2, K4, P2, K2, M1L, K10, M1R, K2, P2, K4, P2, K4 (40 sts)

Row 4 (WS): P4, K2, P4, K2, P16, K2, P4, K2, P4

Row 5 (RS): K4, P2, C4F, P2, K3, M1L, K10, M1R, K3, P2, C4B, P2, K4 (42 sts)

Row 6 (WS): P4, K2, P4, K2, P18, K2, P4, K2, P4

Row 7 (RS): K4, P2, K4, P2, K4, M1L, K10, M1R, K4, P2, K4, P2, K4 (44 sts)

Row 8 (WS): P4, K2, P4, K2, P20, K2, P4, K2, P4

Note: M1L and M1R are invisible increases that prevent holes. To M1L, pick up the bar between stitches from front to back and knit through the back loop. To M1R, pick up the bar from back to front and knit through the front loop.

Separate Thumb

Next Row (RS): K4, P2, C4F, P2, K4, place next 12 sts on a stitch holder for thumb, CO 2 sts, K4, P2, C4B, P2, K4 (34 sts)

Continue in pattern (cables as established, stockinette over the hand stitches) until hand measures 1.5 inches from thumb separation, ending with a WS row.

Top Ribbing

Row 1 (RS): *K2, P2* repeat from * to end.

Row 2 (WS): *K2, P2* repeat from * to end.

Repeat these 2 rows for 1 inch. Bind off loosely in pattern. A loose bind-off ensures the top edge stretches comfortably over your hand.

Thumb

Transfer 12 sts from holder to needles. Pick up and knit 2 sts from the CO edge at the base of the thumb (14 sts).

Work in K2, P2 ribbing for 1 inch. Bind off loosely in pattern.

Finishing

Sew the side seam from the cuff up to the thumb, then continue sewing the seam from the thumb to the top ribbing. Use a mattress stitch for an invisible seam that lies flat. Weave in all ends with your tapestry needle.

Repeat for the second glove. Congratulations—you've just created a pair of beautiful, cozy fingerless gloves!

Tips for Success

• Keep your cable needle handy: You'll use it frequently in the hand section. Hold it in front (C4F) or back (C4B) as directed—this determines the direction of the cable twist.
• Count your stitches: After each increase row, verify you have the correct stitch count before proceeding.
• Block your gloves: After seaming, gently block them to even out the stitches and enhance the cable definition. Lay flat to dry.
• Make them yours: Experiment with different colors—deep forest green, warm cream, or heather gray all work beautifully with this pattern.

These Emberfall Ridge Fingerless Gloves make wonderful handmade gifts for friends and family. The rich texture and warm tones capture the essence of autumn, making them a seasonal favorite you'll reach for year after year. Happy knitting!