Frosty Forest Fox Hood Free Crochet Pattern

Wrap yourself in woodland whimsy with this cozy crochet fox hood, featuring a plush faux fur trim and adorable pointy ears. Perfect for chilly days and imaginative play, this hood is a delightful twist on classic animal hats. Whether you're crafting for your little one or embracing your own inner fox, this pattern is beginner-friendly and creates a stunning, huggable accessory that will turn heads wherever you go.

Materials Needed

Before you begin, gather the following supplies to ensure a smooth crochet session:

• Yarn: Worsted weight yarn in burnt orange (main color), cream (face patch and ear inner), and black (details). You'll need approximately 200-250 yards of burnt orange, 50 yards of cream, and 20 yards of black.
• Faux Fur Yarn: A small amount (about 30-40 yards) of warm cream faux fur yarn for the trim. This adds that plush, cozy frame around the face and bottom edge.
• Hook: H/8 (5.0 mm) crochet hook. Ensure your hook is comfortable for extended use.
• Other Tools: Yarn needle for sewing and weaving in ends, stitch markers (optional but helpful), and scissors.

Gauge: 16 sc x 18 rows = 4 inches in single crochet. Always check your gauge to ensure the hood fits properly. If your gauge is off, adjust your hook size accordingly.

Step-by-Step Instructions

This pattern is worked in continuous rounds (spiral) unless otherwise noted. Use a stitch marker to keep track of your rounds. Let's dive in!

Hood Base (Worked in the Round from the Top Down)

The hood starts at the crown and works downward, creating a seamless, dome-like shape.

• Round 1: With burnt orange yarn, make a magic ring, ch 1, work 6 sc into ring. Pull tight to close. (6 sts)
• Round 2: 2 sc in each st around. (12 sts)
• Round 3: (Sc in next st, 2 sc in next st) around. (18 sts)
• Round 4: (Sc in next 2 sts, 2 sc in next st) around. (24 sts)
• Round 5: (Sc in next 3 sts, 2 sc in next st) around. (30 sts)
• Round 6: (Sc in next 4 sts, 2 sc in next st) around. (36 sts)
• Round 7: (Sc in next 5 sts, 2 sc in next st) around. (42 sts)
• Round 8: (Sc in next 6 sts, 2 sc in next st) around. (48 sts)
• Round 9: (Sc in next 7 sts, 2 sc in next st) around. (54 sts)
• Round 10: (Sc in next 8 sts, 2 sc in next st) around. (60 sts)
• Rounds 11-20: Sc in each st around. (60 sts) — This creates the main body of the hood. Keep your tension even for a smooth, dense fabric.

Face Opening

Now we'll shape the face opening by working in rows instead of rounds. This creates a curved edge that frames the face beautifully.

• Row 21: Ch 1, turn. Sc in next 30 sts. Leave remaining 30 sts unworked. (30 sts) — You'll now work back and forth on these 30 stitches only.
• Row 22: Ch 1, turn. Sc2tog, sc in next 26 sts, sc2tog. (28 sts) — Note: The sc2tog at the beginning and end of each row creates the tapered shape.
• Row 23: Ch 1, turn. Sc2tog, sc in next 24 sts, sc2tog. (26 sts)
• Row 24: Ch 1, turn. Sc2tog, sc in next 22 sts, sc2tog. (24 sts)
• Row 25: Ch 1, turn. Sc2tog, sc in next 20 sts, sc2tog. (22 sts)
• Row 26: Ch 1, turn. Sc2tog, sc in next 18 sts, sc2tog. (20 sts)
• Row 27: Ch 1, turn. Sc2tog, sc in next 16 sts, sc2tog. (18 sts)
• Row 28: Ch 1, turn. Sc2tog, sc in next 14 sts, sc2tog. (16 sts)
• Row 29: Ch 1, turn. Sc2tog, sc in next 12 sts, sc2tog. (14 sts)
• Row 30: Ch 1, turn. Sc2tog, sc in next 10 sts, sc2tog. (12 sts)
• Row 31: Ch 1, turn. Sc2tog, sc in next 8 sts, sc2tog. (10 sts)
• Row 32: Ch 1, turn. Sc2tog, sc in next 6 sts, sc2tog. (8 sts)
• Row 33: Ch 1, turn. Sc2tog, sc in next 4 sts, sc2tog. (6 sts)
• Row 34: Ch 1, turn. Sc2tog, sc in next 2 sts, sc2tog. (4 sts)
• Row 35: Ch 1, turn. Sc2tog twice. (2 sts)
• Row 36: Ch 1, turn. Sc2tog. Fasten off, leaving a long tail. Weave through remaining sts and pull tight to close the top of the hood. This creates a neat, rounded crown.

Ears (Make 2)

These adorable pointy ears are worked in the round and then sewn onto the hood. They add the signature fox silhouette.

• Round 1: With burnt orange yarn, magic ring, ch 1, 6 sc into ring. (6 sts)
• Round 2: 2 sc in each st around. (12 sts)
• Round 3: (Sc in next st, 2 sc in next st) around. (18 sts)
• Rounds 4-6: Sc in each st around. (18 sts) — Work these three rounds without increases to form the ear's height.
• Round 7: (Sc2tog, sc in next st) around. (12 sts) — Begin decreasing to taper the ear.
• Round 8: Sc2tog around. (6 sts) — Continue decreasing.
• Fasten off, leaving a long tail. Flatten the ear so the decreases are centered, and sew it to the top of the hood, positioning them symmetrically on either side of the crown. Use the tail to securely stitch the ear in place, weaving the end inside the hood.

Faux Fur Trim

This is where the hood gets its cozy, luxurious feel. The faux fur yarn creates a fluffy frame that's soft against the skin.

• With faux fur yarn, work sc around the face opening and the bottom edge of the hood. Start at one corner of the face opening and work your way around the entire opening, then continue along the bottom edge of the hood.
• Work 2-3 rounds of sc to create a fluffy, substantial frame. The faux fur yarn can be tricky to see stitches, so work slowly and feel for the loops. Use a stitch marker to keep your place.
• Fasten off and weave in all ends securely. The trim should be plush and frame the face beautifully.

Fox Face Details

Now for the finishing touches that bring your fox to life!

• Cream Oval Patch: Using cream yarn and a yarn needle, embroider a small oval patch around the eye area. Start at the center of the face opening and work outward in a spiral or oval shape, using a satin stitch or running stitch. This creates the fox's characteristic white muzzle area.
• Nose and Mouth: With black yarn, embroider a small triangle or oval for the nose at the center of the face opening, just above the cream patch. Then, create a small "Y" shape below the nose for the mouth, using simple backstitches.
• Eyes: Add small black triangles for eyes using surface crochet or embroidery. Position them on either side of the nose, slightly above and outward. You can use a simple chain stitch or satin stitch to create the triangular shapes. Ensure they are symmetrical for a balanced look.

Final Touches

Once all pieces are attached and details are embroidered, give your hood a gentle hand wash and lay it flat to dry. This will help the yarn relax and the stitches settle. Weave in any remaining loose ends with your yarn needle.

Your Frosty Forest Fox Hood is now complete! Slip it on, adjust the face opening, and enjoy the cozy, whimsical warmth. This hood makes a fantastic gift for kids and adults alike, and it's perfect for woodland-themed photos, winter adventures, or just snuggling up at home. Happy crocheting!