Sunny Chevron Tissue Box Cover Free Crochet Pattern

Sunny Chevron Tissue Box Cover – Free Beginner Crochet Pattern

Introduction

If you have ever wanted to make something cheerful that you can actually use every single day, this Sunny Chevron Tissue Box Cover is the perfect first project for you. It is made from just two flat rectangles of simple ripple stitches, seamed together into a tidy little cube, so you never have to work in the round or shape a curve. The butter yellow and white stripes look like sunshine and clouds, and the soft linen-blend yarn gives the finished cover a gentle, matte texture that feels lovely in your hand. Slip it over a standard cube tissue box on your desk, in your car, or on a nightstand, and suddenly a boring cardboard box becomes a happy little decoration. Best of all, every stitch in this pattern is one you can learn in five minutes.

Materials Needed

• Yarn: Worsted-weight (CYC 4) linen-blend yarn, approximately 180–200 yards total — about 100 yards butter yellow and 80–100 yards white.
• Crochet hook: 5.0 mm (US H-8).
• Stitch markers: At least 4, to mark your peaks and valleys.
• Tapestry needle: A blunt-tipped yarn needle for seaming and weaving in ends.
• Scissors: Any sharp pair for cutting yarn.
• Measuring tape (for checking gauge and size).
• Finished size: Fits a standard cube tissue box about 4.5 x 4.5 x 5 inches (11.5 x 11.5 x 12.5 cm). The finished cover measures about 5 x 5 x 5.25 inches (12.7 x 12.7 x 13.3 cm) with a little stretch. Each panel is about 5 x 5.25 inches (12.7 x 13.3 cm), and the oval tissue opening on top is about 4.25 x 1.5 inches (10.8 x 3.8 cm).

Abbreviations and Beginner Glossary

• ch – chain: Make a loop of yarn over the hook and pull it through the loop on your hook. This creates the foundation "chain" you build on.
• sc – single crochet: Insert your hook into the stitch, pull up a loop (2 loops on hook), yarn over, and pull through both loops. One short, firm stitch.
• dc – double crochet: Yarn over first, insert hook into the stitch, pull up a loop (3 loops on hook), yarn over and pull through 2 loops, yarn over and pull through the last 2 loops. A taller stitch than sc.
• dc2tog – double crochet 2 together (a decrease): Yarn over, insert hook into the stitch, pull up a loop (3 loops), yarn over and pull through 2 loops (2 loops left). Yarn over again, insert hook into the next stitch, pull up a loop (4 loops), yarn over and pull through 2 loops, yarn over and pull through the last 3 loops. This turns two stitches into one and makes the "valley" of the chevron.
• st(s) – stitch(es): A single loop or completed stitch in your work.
• sk – skip: Do not work into that stitch; move past it to the next one.
• rep – repeat: Do the same instruction again.
• RS – right side: The "front" or public face of your work.
• 2 sc in next st – increase: Work two single crochet stitches into the same stitch. This makes the "peak" of the chevron.
• Fasten off: Cut the yarn a few inches from your work and pull the tail through the last loop to lock it.
• Join (a new color): Finish your last stitch with the old color, then loop the new color onto your hook and pull it through to begin the next row.

Gauge

16 stitches x 8 rows = 4 inches (10 cm) in chevron pattern. Each chevron repeat (17 stitches) measures about 4.25 inches wide.

Why gauge matters: Gauge is how big your stitches come out. If your stitches are looser than the pattern, your cover will be too baggy; if tighter, it will not fit over the box. How to swatch: Chain 36, work the chevron pattern for about 8 rows, then lay the swatch flat and measure a 4-inch section across the middle with your tape measure. If you have more than 16 stitches in 4 inches, go up one hook size; if fewer, go down one. Your finished panel should measure about 5 inches wide.

Beginner Tips Before You Start

• Use stitch markers on your peaks. Place a marker in the first "2 sc in next st" peak of each row so you can see at a glance whether your peaks are stacking up in a straight line.
• Count every row. Each row should have 51 stitches. If you are off by one, the chevron will drift sideways. Count before you turn.
• Do not pull your yarn too tight. Tension should be relaxed and even — tight stitches make the cover stiff and hard to slide over the box.
• Keep your turning chain loose. The "ch 1" at the start of each row is not a stitch; it just lifts your yarn to the next row. A loose one keeps your edges straight.
• Work your stripes in 4-row blocks. Change color at the end of a row, not mid-row, so the stripe edges stay neat.
• Check your size as you go. After 8 rows, your panel should be roughly 1 inch tall. If it is much bigger, your gauge is off.

Step-by-Step Instructions

The Chevron Pattern (read this once)

Row 1 (RS): Ch 1, sc in first st, *sc in next 3 sts, dc in next 4 sts, dc2tog twice, dc in next 4 sts, sc in next 3 sts, 2 sc in next st; rep from * to last st, sc in last st.

Row 2: Ch 1, turn, sc in first st, *sc in next 3 sts, dc in next 4 sts, dc2tog twice, dc in next 4 sts, sc in next 3 sts, 2 sc in next st; rep from * to last st, sc in last st. (51 sts)

Repeat Row 2 for the entire pattern. The "2 sc in next st" makes the peak; the "dc2tog twice" makes the valley. Keep peaks over peaks and valleys over valleys.

Side Panel (make 2)

With butter yellow, ch 53.

Row 1 (RS): Sc in 2nd ch from hook, sc in next 3 ch, dc in next 4 ch, dc2tog twice, dc in next 4 ch, sc in next 3 ch, 2 sc in next ch, *sc in next 3 ch, dc in next 4 ch, dc2tog twice, dc in next 4 ch, sc in next 3 ch, 2 sc in next ch; rep from * to last ch, sc in last ch. (51 sts)

Row 2: Ch 1, turn, sc in first st, *sc in next 3 sts, dc in next 4 sts, dc2tog twice, dc in next 4 sts, sc in next 3 sts, 2 sc in next st; rep from * to last st, sc in last st. (51 sts)

Rows 3–4: Repeat Row 2 in butter yellow. (51 sts) Fasten off yellow.

Rows 5–8: Join white, repeat Row 2. (51 sts) Fasten off white.

Rows 9–12: Join butter yellow, repeat Row 2. (51 sts) Fasten off yellow.

Rows 13–16: Join white, repeat Row 2. (51 sts) Fasten off white.

Rows 17–20: Join butter yellow, repeat Row 2. (51 sts) Fasten off yellow.

Rows 21–24: Join white, repeat Row 2. (51 sts) Fasten off white.

Rows 25–28: Join butter yellow, repeat Row 2. (51 sts) Fasten off yellow.

Rows 29–32: Join white, repeat Row 2. (51 sts) Fasten off white.

Rows 33–36: Join butter yellow, repeat Row 2. (51 sts) Fasten off yellow.

Rows 37–40: Join white, repeat Row 2. (51 sts) Fasten off white.

Rows 41–44: Join butter yellow, repeat Row 2. (51 sts) Fasten off yellow.

Rows 45–48: Join white, repeat Row 2. (51 sts) Fasten off white.

Rows 49–52: Join butter yellow, repeat Row 2. (51 sts) Fasten off yellow.

Panel measures approximately 5 x 5.25 inches (12.7 x 13.3 cm). Make a second identical panel.

Top Panel with Oval Opening

With butter yellow, ch 53.

Rows 1–4: Work the chevron pattern (Row 1, then Row 2 three times) in butter yellow. (51 sts)

Row 5: Join white. Work chevron pattern across first 17 sts, ch 17, sk next 17 sts (this creates the opening), work chevron pattern across remaining 17 sts. (51 sts, counting the ch-17 as 17 sts)

Rows 6–8: Work chevron pattern in white, treating each of the ch-17 as a stitch. (51 sts)

Rows 9–12: Join butter yellow, work chevron pattern. (51 sts)

Rows 13–16: Join white, work chevron pattern. (51 sts)

Rows 17–20: Join butter yellow, work chevron pattern. (51 sts)

Rows 21–24: Join white, work chevron pattern. (51 sts)

Rows 25–28: Join butter yellow, work chevron pattern. (51 sts)

Rows 29–32: Join white, work chevron pattern. (51 sts)

Rows 33–36: Join butter yellow, work chevron pattern. (51 sts)

Rows 37–40: Join white, work chevron pattern. (51 sts)

Rows 41–44: Join butter yellow, work chevron pattern. (51 sts)

Rows 45–48: Join white, work chevron pattern. (51 sts)

Rows 49–52: Join butter yellow, work chevron pattern. (51 sts) Fasten off.

Top panel measures approximately 5 x 5.25 inches (12.7 x 13.3 cm) with a centered oval opening about 4.25 x 1.5 inches (10.8 x 3.8 cm).

Assembly and Finishing

1. Block both panels lightly. Spritz them with water, pat them flat to the measurements above, and let them dry. This relaxes the stitches so your seams lie flat.
2. Seam the sides into a tube. Place the two side panels with right sides together (the prettier, front faces touching). Thread your tapestry needle with butter yellow yarn and whipstitch (a simple over-and-over stitch through both edges) down one side edge, then down the other side edge, leaving the top and bottom open. You now have a square tube.
3. Attach the top panel. With right sides together, pin the top panel to the top edge of the tube, matching corners and centering the oval opening. Whipstitch all the way around the top edge. Turn the cover right side out.
4. Make the bottom hem. Fold the bottom edge under about 1/4 inch. With butter yellow yarn, single crochet evenly around the bottom edge (about 1 sc in each stitch or edge space) to create a neat hem. Fasten off.
5. Weave in all ends. Thread each yarn tail onto your tapestry needle and run it back and forth through the inside of the fabric for about an inch, then trim close.
6. Slip it on. Pull the cover over your tissue box and draw the tissues gently through the oval opening.

Care: Hand wash cold and lay flat to dry.

Pro Tips and Variations

• Change the colors: Swap butter yellow and white for any two shades you love — mint and cream, blush and grey, or navy and white for a bolder look. Keep the 4-row stripe rhythm for the same cheerful effect.
• Adjust the size: To fit a larger box, add one more chevron repeat (17 stitches) to your starting chain and work a few extra rows until the panel matches your box height. To fit a smaller box, remove one repeat.
• Try a different yarn: Cotton or acrylic worsted-weight yarn works beautifully; just check your gauge again, since linen blend behaves a little differently.
• Make it a gift set: Whip up two covers in coordinating colors — one for the car, one for the desk — and tie them with a ribbon for a sweet handmade present.